Mosamia Art
Installation
An artwork arrives as modules, numbered on the back, with a placement guide for the wall.
Each module is 31.2 cm × 31.2 cm and carries its own 1 cm × 1 cm tesserae. A piece is assembled from as many as its size needs. From there you have two routes: bond it permanently, like any natural stone surface, or hang it on the optional magnetic system, which takes the same modules off the wall again without damage.
- Module
- 31.2 cm × 31.2 cm (12.3 in × 12.3 in)
- Tesserae
- 1 cm × 1 cm natural stone
- Backing
- Mesh, as standard
- Grout
- Epoxy or conventional grey
It goes up in pieces
A large artwork is not one slab. It is a grid of 31.2 cm modules, each one a section of the picture, and the joints between them run through the work rather than around it.
That is why every project ships with a placement guide, and why each module carries its placement information on its backing. An installer does not have to work out the order from the picture — the picture is the hard way to do it.
Fixed, like any stone surface
Bonded, the work is an architectural surface rather than a hung object. It can go on walls and floors, in homes, commercial interiors, hospitality spaces, offices, public interiors and feature areas.
Grout is chosen for the application: epoxy where the surface has to take water or cleaning, conventional grey where it does not.
Atatürk Portrait, mounted on a brushed metal backing.
Optional
Or hang it, and take it down again
Modules are mesh-backed as standard. For this option, magnets are attached to the back of the mesh and a 2 mm galvanised steel sheet is fitted to the wall. Each module then places individually onto the steel: no permanent bonding, joints aligned by hand, and removal is simply pulling the module away from the sheet.
It is built for work that has to move — trade fairs, exhibitions, showrooms, shopping malls, offices, temporary displays, and homes where a piece may be relocated. The same artwork can be taken down and reused elsewhere.
This is an option, not a replacement. Most work is still bonded permanently, and the two are specified per project.
Planning a wall?
Send the dimensions and the image you have in mind. We will come back with the minimum size it needs to read properly, a simulation, and which of the two fixing routes suits the space.